LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Automatic >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 4L60-E/4L65-E/4L70-E - Introduction (2 Of 2) >> Repair Instructions >> Repair Instructions - Off Vehicle >> Transmission Fluid Pan Installation

Transmission Fluid Pan Installation

    Fig 1: View Of Transmission Oil Pan & Gasket
    GM1265865Courtesy of GENERAL MOTORS CORP.
  1. Place the transmission oil pan gasket (73) on the case.
  2. Place the transmission oil pan (75) on the case.
  3. NOTE: Refer to Fastener Notice .
  4. Install all of the transmission oil pan screws (76).

    Tighten:  Tighten the screws to 16 N.m (11.8 lb ft).