LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Automatic >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 4L60-E/4L65-E/4L70-E - Introduction (2 Of 2) >> Repair Instructions >> Repair Instructions - Off Vehicle >> Reverse Input Clutch Bushing Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Reverse Input Clutch Front Bushing
    GM7872Courtesy of GENERAL MOTORS CORP.
  1. Using the J 25019-9  with the J 8092  , install a reverse input clutch front bushing (603). See Special Tools .
    2. Fig 2: Installing Reverse Input Clutch Rear Bushing
    GM7874Courtesy of GENERAL MOTORS CORP.
  2. Using the J 34196-3 which is part of kit J 34196-B  with the J 8092  , install a reverse input clutch rear bushing (606). See Special Tools .
scientia non olet · About LEMON Manuals