LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Automatic >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 4L60-E/4L65-E/4L70-E - Introduction (2 Of 2) >> Repair Instructions >> Repair Instructions - Off Vehicle >> Manual Detent Spring Installation

Manual Detent Spring Installation

    Fig 1: View Of Manual Detent Spring Assembly
    GM13263Courtesy of GENERAL MOTORS CORP.
  1. Inspect the manual detent spring assembly (63) for cracks or damage.
  2. Install the manual detent spring assembly (63).
    3. NOTE: Refer to Fastener Notice .
  3. Install the manual detent spring bolt (64).

    Tighten:  Tighten the bolt to 20-27 N.m (15-20 lb ft).

scientia non olet · About LEMON Manuals