LEMON Manuals
: Even more car manuals for everyone
Home
>>
Isuzu
>>
2007
>>
i-290 LS, Automatic
>>
Repair and Diagnosis
>>
Transmission
>>
Hydraulic Diagrams
>>
Automatic Transmission - 4L60-E/4L65-E/4L70-E - Introduction (2 Of 2)
>>
Repair Instructions
>>
Repair Instructions - Off Vehicle
>>
2-4 Band, Input Clutches, Input Gear Set Removal
2-4 Band, Input Clutches, Input Gear Set Removal
Fig 1: Identifying Band Anchor Pin
Courtesy of GENERAL MOTORS CORP.
Remove the band anchor pin (41).
Fig 2: Input Housing & Shaft Assembly & Reverse Input Clutch Housing & Drum Assembly
Courtesy of GENERAL MOTORS CORP.
Remove the input housing and shaft assembly (621), along with the reverse input clutch housing and drum assembly (605).
Fig 3: View Of 2-4 Band Assembly
Courtesy of GENERAL MOTORS CORP.
Remove the 2-4 band assembly (602).