LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Manual Transmission Clutch System) >> Repair Instructions >> Clutch Pedal Position Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Clutch Release Switch Electrical Connector
    GM1302119Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the electrical connector (2) from the clutch pedal position switch (1).
    2. Fig 2: Exploded View Of Clutch Release Switch
    GM1302120Courtesy of GENERAL MOTORS CORP.
  2. Push the clutch pedal position switch retaining plate locking tabs (2) inward toward each other to release.
  3. Remove the clutch pedal position switch (3) from the clutch pedal assembly (1).
scientia non olet · About LEMON Manuals