LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Manual Transmission Clutch System) >> Repair Instructions >> Clutch Actuator Cylinder Release Bearing Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the transmission. Refer to Transmission Replacement (4WD) or Transmission Replacement (RWD) .
    2. Fig 1: View Of Clutch Actuator Cylinder Dust Cover & Clutch Actuator Cylinder Release Bearing
    GM1392384Courtesy of GENERAL MOTORS CORP.
  2. Pull the clutch actuator cylinder release bearing (2) from the clutch actuator cylinder dust cover (1).
scientia non olet · About LEMON Manuals