LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Manual Transmission Clutch System) >> Diagnostic Information and Procedures >> Clutch Pedal Hard to Push

Clutch Pedal Hard to Push

WARNING: This page is about a different variant/trim than selected.
Clutch Pedal Hard to Push

Cause Action
DEFINITION: The clutch pedal requires high effort to operate.
Review the Symptoms - Clutch  and perform the necessary inspections.
Incorrect hydraulic fluid
  1. Inspect for the correct fluid in the master cylinder. Refer to Hydraulic Clutch Bleeding .
  2. Flush the hydraulic system and fill with the correct fluid.
Contaminated hydraulic fluid
  1. Inspect the hydraulic fluid for water.
  2. Inspect the hydraulic fluid for dirt or debris.
  3. Flush the hydraulic system and fill with the correct fluid. Refer to Hydraulic Clutch Bleeding .
Clutch pedal binding
  1. Inspect the pedal for binding.
  2. Repair or replace the pedal. Refer to Clutch Pedal Replacement .
Kinked or damaged clutch hydraulic pipe
  1. Inspect for a kinked or damaged hydraulic hose.
  2. Repair or replace the clutch hydraulic hose. Refer to Clutch Master Cylinder Replacement .
Clutch disc worn too thin Replace the clutch assembly. Refer to Clutch Assembly Replacement .
scientia non olet · About LEMON Manuals