LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Manual Transmission - AISIN Ar5) >> Repair Instructions >> Transmission Input Shaft Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the transmission input shaft bearing retainer. Refer to Transmission Input Shaft Bearing Retainer Replacement .
    2. Fig 1: Removing/Installing Input Shaft Seal
    GM872983Courtesy of GENERAL MOTORS CORP.
  2. Using a hammer and a punch, remove the input shaft seal from the input shaft bearing retainer.
scientia non olet · About LEMON Manuals