LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Manual Transmission - AISIN Ar5) >> Diagnostic Information and Procedures >> DTC P0833 >> Typical Scan Tool Data

Typical Scan Tool Data

WARNING: This page is about a different variant/trim than selected.
Typical Scan Tool Data

Display Parameters Normal Range Short to Ground Open/High Resistance Short to Voltage
Operating Conditions: Ignition ON, clutch pedal Released.
Clutch Start Switch Signal Released Released Released Applied
scientia non olet · About LEMON Manuals