LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Automatic Transaxle - 4T80-E - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - Off Vehicle >> Second Clutch Plates and Reverse Clutch Removal

Second Clutch Plates and Reverse Clutch Removal

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Second Clutch Plates
    GM11867Courtesy of GENERAL MOTORS CORP.
  1. Remove the second clutch steel assembly (431-435). Push up near the scavenge tube channel and the bottom pan side.
  2. Remove the reverse clutch support thrust washer (436).