LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Automatic >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Rear Side Door Hinge Replacement - Door Side >> Removal Procedure

Removal Procedure

    Fig 1: View Of Rear Door Check Link Retaining Bolt
    GM1256466Courtesy of GENERAL MOTORS CORP.
  1. Open the rear door.
  2. Remove the bolt retaining the rear door check link to the body.
  3. Remove the rear door wiring harness grommet from the body and disconnect the door wiring harness connectors. Refer to Rear Side Door Wiring Harness Replacement .
    4. Fig 2: View Of Rear Door Hinge Keeper Strap Retaining Bolts
    GM1256440Courtesy of GENERAL MOTORS CORP.
  4. Remove the bolts (1) retaining the rear door hinge keeper straps.
  5. With the aid of an assistant, lift the rear door up off the body side hinges and place the door on a clean, protected surface.
    6. Fig 3: View Of Door Hinges
    GM1302496Courtesy of GENERAL MOTORS CORP.
  6. Remove the bolts retaining the door side hinges to the door.
  7. Remove the hinges from the door.
scientia non olet · About LEMON Manuals