Removal Procedure
Courtesy of GENERAL MOTORS CORP.
- Open the front door.
- Remove the bolt retaining the front door check link to the body.
- Remove the front door wiring harness grommet from the body and disconnect the door wiring harness connectors. Refer to Front Side Door Wiring Harness Replacement .
Courtesy of GENERAL MOTORS CORP.
- Remove the bolts (1) retaining the front door hinge keeper straps.
- With the aid of an assistant, lift the front door up off the body side hinges and place the door on a clean, protected surface.
Courtesy of GENERAL MOTORS CORP.
- Remove the bolts retaining the door side hinges to the door.
- Remove the hinges from the door.