LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 339 (Engine Mechanical - 5.3L Or 6.0L (3 Of 4)) >> Off-Vehicle Repair Information (Part 2) >> Engine Flywheel Cleaning & Inspection

Engine Flywheel Cleaning & Inspection

WARNING: This page is about a different car, the 2008 GMC Envoy and 2008 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Ring Gear Teeth
    GM1658199Courtesy of GENERAL MOTORS CORP.
  1. Clean the flex plate in solvent.
    2. CAUTION: Refer to Safety Glasses Caution .
  2. Dry the flex plate with compressed air.
  3. Inspect the flex plate for the following conditions:
    • Damaged ring gear teeth (1)
    • Stress cracks around the flex plate-to-crankshaft bolt hole locations (2)
      • IMPORTANT: Do not attempt to repair the welded areas that retain the ring gear to the flex plate. Install a new flex plate.
    • Welded areas (3) that retain the ring gear onto the flex plate for cracking
scientia non olet · About LEMON Manuals