LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 312 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Introduction (2 Of 2)) >> Specifications >> Reverse Input Clutch Backing Plate Selection

Reverse Input Clutch Backing Plate Selection

WARNING: This page is about a different car, the 2008 Isuzu Ascender, 2008 GMC Envoy, and 2008 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
Reverse Input Clutch Backing Plate Selection Table

Plate Thickness Identification
7.249-7.409 mm (0.285-0.292 in) 2
6.678-6.519 mm (0.263-0.257 in) 3
5.947-5.787 mm (0.234-0.228 in) 4
Backing Plate Travel: 1.02-1.94 mm (0.40-0.76 in)
scientia non olet · About LEMON Manuals