Fastener Tightening Specifications
WARNING: This page is about a different car, the 2008 Isuzu Ascender, 2008 GMC Envoy, and 2008 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
| Description of Usage | Ref No.* | Qty | Size | Specification | |
|---|---|---|---|---|---|
| Metric | English | ||||
| Accumulator Cover to Case | 58 | 1 | M6x1.0x65 | 8-14 N.m | 71-124 lb in |
| Accumulator Cover to Case | 117 | 1 | M6x1.0x65 | 8-14 N.m | 71-124 lb in |
| Accumulator Cover to Case | 118 | 2 | M6x1.0x28.0 | 8-14 N.m | 71-124 lb in |
| Accumulator Cover to Case | 59 | 2 | M6x1.0x35 | 8-14 N.m | 71-124 lb in |
| Control Lever Nut | - | - | - | 20 N.m | 15 lb ft |
| Converter Cover Bolt | - | - | - | 10 N.m | 89 lb in |
| Converter Housing to Case | 94 | 8 | M10x1.5gx45 | 65-75 N.m | 48-55 lb ft |
| Cooler Pipe Connector | 95 | 2 | 1/4-18NSPS(SPL) | 35-41 N.m | 26-30 lb ft |
| Detent Spring to Valve Body | 64 | 1 | M8x1.25x20 | 20-27 N.m | 15-20 lb ft |
| Converter Housing to Case Screw | - | - | - | 65.0-75.0 N.m | 48-55 lb ft |
| Extension Housing to Case | 32 | 6 | M10x1.5x33.4 | 42-48 N.m | 31-35 lb ft |
| Extension Housing to Case (4WD Shipping) | N/A | 4 | M10x1.5x33.4 | 11-23 N.m | 8-17 lb in |
| Floorshift Control Bolt | - | - | - | 10 N.m | 89 lb in |
| Flywheel to Torque Converter Bolt | - | - | - | 63 N.m | 46 lb ft |
| Forward Accumulator Cover to Valve Body | 364 | 3 | M6x1.0x17.7 | 8-14 N.m | 71-124 lb in |
| Fuel Hose Pipe Bracket Nut | - | - | - | 20 N.m | 15 lb ft |
| Heat Shield to Transmission Bolt | - | - | - | 17 N.m | 13 lb ft |
| Input Speed Sensor Hole Plug to Pump Cover | 248 | 1 | M6x1.0x17.7 | 9-11 N.m | 80-97 lb in |
| Input Speed Sensor to Pump Cover | 247 | 1 | M6x1.0x17.7 | 9-11 N.m | 80-97 lb in |
| Line Pressure Test Hole Plug | 39 | 1 | 1/8-27NPTF | 8-14 N.m | 71-124 lb in |
| Manual Shaft to Detent Lever Nut | 90 | 1 | M10x1.5 | 27-34 N.m | 20-25 lb ft |
| Negative Battery Cable Bolt | - | - | - | 15 N.m | 11 lb ft |
| Oil Cooler Pipe Fitting | 10 | 2 | 9/16-18UNF | 20 +/- 2 N.m | 15 lb ft |
| Oil Level Indicator Bolt | - | - | - | 47 N.m | 35 lb ft |
| Oil Passage Cover (Spacer Plate Support) to Case | 77 | 3 | M6x1.0x17.7 | 8-14 N.m | 71-124 lb in |
| Oil Passage Cover (Spacer Plate Support) to Case | 115 | 1 | M6x1.0x19.0 | 8-14 N.m | 71-124 lb in |
| Park Lock Bracket to Case | 87 | 1 | M8x1.25x20 | 27-34 N.m | 20-25 lb ft |
| Park/Neutral Position Switch Screw | - | - | - | 3 N.m | 27 lb in |
| Plate to Case (Shipping) | N/A | 2 | M10x1.5x35 | 27-34 N.m | 20-25 lb ft |
| Plate to Converter (Shipping) | N/A | 1 | M10x1.5x15 | 27-34 N.m | 20-25 lb ft |
| Pressure Control Solenoid Bracket to Valve Body Bolt | 364 | 1 | M6x1.0x17.7 | 8-14 N.m | 71-124 lb in |
| Pump Assembly to Case | 2 | 7 | M8x1.25x60 | 26-32 N.m | 19-24 lb ft |
| Pump Cover to Pump Body | 233 | 5 | M8x1.25x40 | 20-27 N.m | 15-20 lb ft |
| Shift Cable Grommet Screw | - | - | - | 1.7 N.m | 15 lb in |
| Shift Control Cable Attachment | - | - | - | 20 N.m | 15 lb ft |
| Speed Sensor Retainer Bolt | 35 | 1 | M6x1.0x15 | 10.5-13.5 N.m | 93-119 lb in |
| TCC Solenoid Assembly to Case | 68 | 2 | M6x1.0x12 | 8-14 N.m | 71-124 lb in |
| Transmission Fluid Pressure (TFP) Manual Valve Position Switch to Body | 70 | 2 | M6x1.0x17.7 | 8-14 N.m | 71-124 lb in |
| Transmission Mount Spacer Bolts | - | - | - | 65 N.m | 48 lb ft |
| Transmission Mount to Exhaust Hanger Bracket Bolt | - | - | - | 30 N.m | 22 lb ft |
| Transmission Mount to Transmission Bolt | - | - | - | 65 N.m | 48 lb ft |
| Transmission Mount to Transmission Support Nut | - | - | - | 46 N.m | 35 lb ft |
| Transmission Oil Pan to Case Screw | 76 | 16 | M8x1.25x19.3 | 9.5-13.6 N.m | 84-120 lb in |
| Transmission to Engine Bolt | - | - | - | 47 N.m | 35 lb ft |
| Valve Body to Case | 62,58 | 3 | M6x1.0x65 | 8-14 N.m | 71-124 lb in |
| Valve Body to Case | N/A | 3 | M6x1.0x54.4 | 8-14 N.m | 71-124 lb in |
| Valve Body to Case | N/A | 9 | M6x1.0x47.5 | 8-14 N.m | 71-124 lb in |
| Valve Body to Case | 59 | 4 | M6x1.0x35 | 8-14 N.m | 71-124 lb in |
| Valve Body to Case | 64 | 3 | M8x1.25x20 | 8-14 N.m | 71-124 lb in |
| Valve body to Case | 68 | 2 | M6x1.0x12 | 8-14 N.m | 71-124 lb in |
| Valve Body to Case | 70,77 | 7 | M6x1.0x18 | 8-14 N.m | 71-124 lb in |
| * Reference Number refers to the callout number on the disassembled view. | |||||