LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 274 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - On Vehicle >> Transmission Mount Replacement (5.3L) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Isuzu Ascender, 2008 GMC Envoy, and 2008 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Transmission Mount To Transmission Support
    GM744176Courtesy of GENERAL MOTORS CORP.
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Support the transmission with a suitable jack.
  3. Remove the nuts securing the transmission mount to the transmission support.
    4. Fig 2: View Of Transmission Crossmember Support
    GM752134Courtesy of GENERAL MOTORS CORP.
  4. Remove the transmission support from the vehicle. Refer to Transmission Support Replacement .
    5. Fig 3: View Of Transmission Mount Bolts
    GM1293735Courtesy of GENERAL MOTORS CORP.
  5. Remove the transmission mount bolts (1, 2).
    6. Fig 4: View Of Transmission Mount
    GM1293472Courtesy of GENERAL MOTORS CORP.
  6. Remove the transmission mount from the vehicle.
scientia non olet · About LEMON Manuals