LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 274 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - Off Vehicle >> Input Sun Gear Bushing Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Isuzu Ascender, 2008 GMC Envoy, and 2008 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Input Sun Gear Front Bushing & Special Tools
    GM213042Courtesy of GENERAL MOTORS CORP.
  1. Using J 34196-4 which is part of kit J 34196-B  with J 8092  , install the input sun gear front bushing (657). See Special Tools .
  2. Using J 34196-6 which is part of kit J 34196-B  with J 8092  , install the input sun gear rear bushing (659). See Special Tools .