LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 274 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - Off Vehicle >> 2-4 Band Assembly Installation

2-4 Band Assembly Installation

WARNING: This page is about a different car, the 2008 Isuzu Ascender, 2008 GMC Envoy, and 2008 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of 2-4 Band Assembly
    GM190436Courtesy of GENERAL MOTORS CORP.
  1. Inspect the 2-4 band assembly (602) for damage or wear.
  2. Install the 2-4 band (602) into the case.
    3. Fig 2: Identifying Band Anchor Pin
    GM1552920Courtesy of GENERAL MOTORS CORP.
  3. Install the band anchor pin (41) into the case.
  4. Index the band to fit the band anchor pin into the band.
scientia non olet · About LEMON Manuals