LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Liftgate Strut Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Liftgate Strut Locations
    GM721370Courtesy of GENERAL MOTORS CORP.
  1. Position the liftgate struts to the liftgate.
  2. Install the upper end of the liftgate struts to the ball joint. Press in to place until fully seated.
  3. Install the lower end of the liftgate struts to the ball joint. Press in to place until fully seated.
  4. Remove the support device from the liftgate.
  5. Close the liftgate.
scientia non olet · About LEMON Manuals