LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Rear Seal Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Locating Air Inlet Grille Panel/Hood Seal
    GM742164Courtesy of GENERAL MOTORS CORP.
  1. Open the hood.
  2. Remove the rear hood seal from the air inlet grille panel studs.
  3. Remove the seal from the air inlet grille panel.
scientia non olet · About LEMON Manuals