LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Latch Support Replacement >> Removal Procedure

Removal Procedure

  1. Remove the headlamp housing panel. Refer to Headlamp Housing Panel Replacement (Envoy, Rainier) or Headlamp Housing Panel Replacement (TrailBlazer) .
  2. Remove the hood latch. Refer to Hood Latch Replacement .
    3. Fig 1: Identifying Hood Latch Support & Radiator Support Retaining Bolts
    GM749967Courtesy of GENERAL MOTORS CORP.
  3. Remove the bolts that retain the hood latch support to the radiator support.
  4. Remove the hood latch support from the vehicle.
scientia non olet · About LEMON Manuals