LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Latch Replacement >> Removal Procedure

Removal Procedure

  1. Remove the grille. Refer to Grille Replacement (Envoy) , Grille Replacement (Rainier) or Grille Replacement (TrailBlazer) .
    2. Fig 1: Identifying Hood Latch-To-Support Bracket Bolts
    GM749964Courtesy of GENERAL MOTORS CORP.
  2. Using a grease pencil or other suitable marking device, mark the location of the latch on the mounting bracket.
  3. Remove the bolts that retain the latch to the mounting bracket.
    4. Fig 2: View Of Hood Latch Cable To Latch
    GM742161Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the hood latch cable from the latch.
  5. Remove the latch from the vehicle.
scientia non olet · About LEMON Manuals