LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Latch Adjustment >> Adjustment Procedure

Adjustment Procedure

    Fig 1: Identifying Hood Latch-To-Support Bracket Bolts
    GM749964Courtesy of GENERAL MOTORS CORP.
  1. Loosen the bolts retaining the hood latch to the support bracket.
    2. NOTE: Refer to Fastener Notice .
  2. Move the hood latch from side to side until the striker enters the center of the latch assembly.

    Tighten:  Tighten the bolts retaining the hood latch to the support bracket to 10 N.m (89 lb in).

scientia non olet · About LEMON Manuals