LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Auxiliary Weatherstrip Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Weatherstrip Side Retainer (Auxiliary)
    GM739853Courtesy of GENERAL MOTORS CORP.
  1. Open the side doors, right or left side.
  2. Remove the push pin retainers from the front door sealing weatherstrip located at the base of the pillar.
  3. Pull back the front door sealing weatherstrip in order to expose the weatherstrip side retainer screws.
  4. Remove the screws from the weatherstrip side retainer.
  5. Remove the weatherstrip side retainer from the windshield pillar.
scientia non olet · About LEMON Manuals