LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Auxiliary Weatherstrip Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Weatherstrip Side Retainer (Auxiliary)
    GM739853Courtesy of GENERAL MOTORS CORP.
  1. Install the weatherstrip side retainer to the windshield pillar.
  2. Install the screws to the weatherstrip side retainer.

    Tighten:  Tighten the screws to the weatherstrip side retainer to 2 N.m (18 lb in).

  3. Install the push pin retainers to the front door sealing weatherstrip located at the base of the pillar.
  4. Close the doors.
scientia non olet · About LEMON Manuals