LEMON Manuals
: Even more car manuals for everyone
Home
>>
Isuzu
>>
2007
>>
Ascender RWD
>>
Repair and Diagnosis
>>
Accessories & Equipment
>>
Gauges & Instrument Panels
>>
Instrument Panel System Displays And Gauges
>>
Diagnostic Information and Procedures
>>
DTC P0608
>>
Conditions for Setting the DTC
Conditions for Setting the DTC
The ECM/PCM detects that the commanded state of the driver and the actual state of the signal circuit do not match.
The above condition must be present for a minimum of 5 seconds.