LEMON Manuals
: Even more car manuals for everyone
Home
>>
Isuzu
>>
2007
>>
Ascender RWD
>>
Repair and Diagnosis
>>
Accessories & Equipment
>>
Gauges & Instrument Panels
>>
Instrument Panel System Displays And Gauges
>>
Diagnostic Information and Procedures
>>
DTC B0540
>>
Conditions for Setting the DTC
Conditions for Setting the DTC
The IPC detects that the vehicle speed signal circuit does not match the vehicle speed from the class 2 serial data circuit.
The condition above must be present for a minimum of 5 seconds.