LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis (Single Page) >> Quick Lookups >> Wiring Diagrams >> Wiring Systems And Power Management - Diagnostic Starting Point And In-Line Harness Connector End Views >> Inline Harness Connectors >> C111 I/P Harness to Body Harness

C111 I/P Harness to Body Harness

C111 I/P Harness to Body Harness Connector End Views

GM632357Courtesy of GENERAL MOTORS CORP.
GM646396Courtesy of GENERAL MOTORS CORP.
C111 I/P Harness to Body Harness Connector Parts Information

Connector Part Information 
  • OEM: 15326829
  • Service: 88953153
  • Description: 6-Way F GT 150 Series Sealed (BK)
 Connector Part Information 
  • OEM: 13530997
  • Service: 15326833
  • Description: 6-Way M GT 150 Series Sealed (BK)
Terminal Part Information 
  • Terminal/Tray: 12191819/8
  • Core/Insulation Crimp: E/A
  • Release Tool/Test Probe: 15315247/J-35616-2A (GY)
 Terminal Part Information 
  • Terminal/Tray: 15326269/19
  • Core/Insulation Crimp: E/4
  • Release Tool/Test Probe: 15315247/J-35616-3 (GY)
C111 I/P Harness to Body Harness Connector Terminal Identification

Pin Wire Color Circuit No. Function Pin Wire Color Circuit No. Function
A D-BU 716 Yaw Rate Sensor Signal A D-BU 716 Yaw Rate Sensor Signal
B L-BU 2088 Low Reference (Early Production) B L-BU 2088 Low Reference
L-BU/BK 2088 Low Reference (Late Production)
C YE 5353 Yaw Ring Raster Control C YE 5353 Yaw Ring Raster Control
D L-BU 715 Lateral D L-BU 715 Lateral
E D-GN 2087 5-Volt Reference E D-GN 2087 5-Volt Reference
F YE 5353 Yaw Ring Raster Control (Early Production) F YE 5353 Yaw Ring Raster Control
D-BU 5370 Yaw Ring Raster Control (Late Production)
scientia non olet · About LEMON Manuals