LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior/Interior Trim >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Seat Cushion Pull Strap Replacement - Rear No. 1 (TrailBlazer, Envoy, Rainier) >> Removal Procedure

Removal Procedure

  1. Remove the rear seat cushion assembly from the vehicle. Refer to Seat Cushion Replacement - Rear No. 1 (TrailBlazer, Envoy, Rainier) .
  2. Remove the rear-seat cushion cover and the pad. Refer to Seat Cushion Cover and Pad Replacement - Rear No. 1 .
    3. Fig 1: View Of Rear Seat Cushion Latch & Strap
    GM753718Courtesy of GENERAL MOTORS CORP.
  3. Remove the strap (1) from the rear seat cushion latch (2).
scientia non olet · About LEMON Manuals