LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior/Interior Trim >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Seat Cushion Bracket Replacement - Rear No. 1 >> Removal Procedure

Removal Procedure

  1. Remove the rear seat cushion assembly from the vehicle. Refer to Seat Cushion Replacement - Rear No. 1 (TrailBlazer, Envoy, Rainier) .
    2. Fig 1: View Of Seat Cushion Bracket Assembly
    GM753713Courtesy of GENERAL MOTORS CORP.
  2. Remove the 2 bolts securing the bracket assembly to the seat cushion.
    3. Fig 2: View Of Bracket Assembly On Seat Cushion
    GM753711Courtesy of GENERAL MOTORS CORP.
  3. Remove the bracket assembly from the seat cushion.
scientia non olet · About LEMON Manuals