LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior/Interior Trim >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Seat Back Latch Bracket - Rear >> Removal Procedure

Removal Procedure

  1. Remove the seat back from the vehicle. Refer to Seat Back Replacement - Rear No. 1 .
    2. Fig 1: Identifying Hinge Bracket Bolts
    GM753533Courtesy of GENERAL MOTORS CORP.
  2. Remove the bolts (2) that retain the latch bracket to the seat hinge.
  3. Remove the latch bracket from the seat hinge.
scientia non olet · About LEMON Manuals