LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior/Interior Trim >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Seat Back Hinge Cover Replacement - Rear No. 1 >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Seat Belt Side Buckle & Retaining Nut
    GM828140Courtesy of GENERAL MOTORS CORP.
  1. Remove the screws from the inboard/outboard rear seat back hinge covers.
  2. Remove the rear seat back hinge cover halves.
scientia non olet · About LEMON Manuals