LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior/Interior Trim >> Luggage Rack And Roof Trim >> Repair Instructions >> Luggage Carrier Rivet Nut Replacement >> Removal Procedure

Removal Procedure

  1. Remove the luggage carrier. Refer to Luggage Carrier Replacement .
    2. Fig 1: View Of Luggage Carrier Rivnut
    GM343998Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to SAFETY GLASSES CAUTION .
  2. Drill through the luggage carrier rivnut head using a 7.5 mm (0.295 in) drill bit.
  3. Remove the rivnut from the roof.
scientia non olet · About LEMON Manuals