LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior/Interior Trim >> Luggage Rack And Roof Trim >> Repair Instructions >> Luggage Carrier Rivet Nut Replacement >> Installation Procedure

Installation Procedure

  1. Using a 10 mm (0.3937 in) drill bit, drill the rivnut hex shape hole in the roof out to a round 10 mm hole.
    2. Fig 1: View Of Luggage Carrier Rivnut
    GM343998Courtesy of GENERAL MOTORS CORP.
  2. Install a replacement rivnut to the hole in roof using a rivnut tool or equivalent.
  3. Install the luggage carrier. Refer to Luggage Carrier Replacement .
scientia non olet · About LEMON Manuals