LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior/Interior Trim >> Interior Trim And Paneling >> Repair Instructions >> Body Side Window Rear Garnish Molding Replacement (TrailBlazer EXT, Envoy XL) >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Garnish Molding - Body Side Window - Rear (TrailBlazer EXT, Envoy XL)
    GM798352Courtesy of GENERAL MOTORS CORP.
  1. Remove the bolt that retains the seat belt upper anchor to the body.
  2. Remove the garnish molding from the vehicle.
scientia non olet · About LEMON Manuals