LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim >> Repair Instructions >> Hood Front Molding Replacement (Envoy) >> Removal Procedure

Removal Procedure

  1. Open the hood.
    2. Fig 1: Identifying Hood Molding & Retaining Clips
    GM742126Courtesy of GENERAL MOTORS CORP.
  2. Release the clips that retain the hood molding to the front of the hood.
  3. Remove the hood molding from the hood.
scientia non olet · About LEMON Manuals