Front Fender Emblem/Nameplate Replacement (GMC and Isuzu)

Fig 1: Identifying Emblem/Nameplate - Front Fender (GMC & Isuzu)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .
1	Front Fender Emblem (V8) Tip: Use heat gun to remove old emblem. Clean all adhesive from the fender, wipe surface dry with a clean lint-free towel prior to installing new emblem. When removing protective liners from the adhesive tape, be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion. Ensure full adhesion of the emblem is made to the front fender.

Callout

Component Name

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Front Fender Emblem (V8)
Tip:

Use heat gun to remove old emblem. Clean all adhesive from the fender, wipe surface dry with a clean lint-free towel prior to installing new emblem.
When removing protective liners from the adhesive tape, be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion.
Ensure full adhesion of the emblem is made to the front fender.