LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Bumper System & Fascia >> Repair Instructions >> Front Bumper Impact Bar Replacement >> Removal Procedure

Removal Procedure

  1. Remove the front fascia. Refer to Front Bumper Fascia Replacement (Envoy) , Front Bumper Fascia Replacement (Rainier)  or Front Bumper Fascia Replacement (TrailBlazer) .
    2. Fig 1: View Of Fascia-To-Fascia Support Rod Push-Pins
    GM740663Courtesy of GENERAL MOTORS CORP.
  2. Remove the bolts (1) that retain the fascia support rods (2) to the impact bar (5).
  3. Remove the fascia support rods from the impact bar.
    4. Fig 2: View Of Impact Bar, Frame & Bolts
    GM740662Courtesy of GENERAL MOTORS CORP.
  4. Remove the bolts (1) that retain the impact bar to the frame (2).
  5. Remove the impact bar (3) from the frame.
  6. Remove the tow hooks from the impact bar. Refer to Front Tow Hook Replacement (TrailBlazer) .
scientia non olet · About LEMON Manuals