LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Bumper System & Fascia >> Repair Instructions >> Front Air Dam Replacement (Rainier) >> Installation Procedure

Installation Procedure

    Fig 1: View Of Front Air Deflector (Bravada)
    GM752092Courtesy of GENERAL MOTORS CORP.
  1. Install the air deflector to the impact bar.
  2. Insert the tabs on the air deflector to the slots in the impact bar.
  3. Install the 3 push-pins that retain the air deflector to the impact bar.
  4. Install the impact bar. Refer to Front Bumper Impact Bar Replacement .
  5. Install the fascia. Refer to Front Bumper Fascia Replacement (Envoy) , Front Bumper Fascia Replacement (Rainier)  or Front Bumper Fascia Replacement (TrailBlazer) .
scientia non olet · About LEMON Manuals