LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System & Washer System >> Repair Instructions >> Wiper Arm Replacement - Rear (TrailBlazer, Envoy) >> Removal Procedure

Removal Procedure

  1. Place the arm in the mid-wipe position on the rear glass.
    2. Fig 1: View Of Rear Wiper
    GM751295Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the washer hose (4).
  3. Remove the wiper arm cover (2).
  4. Disengage the nut (3) retaining the wiper arm to the pivot shaft.
  5. Remove the wiper arm from the pivot shaft.
  6. Remove the wiper arm blade from the wiper arm, if necessary. Refer to Wiper Arm Blade Replacement - Rear (Envoy) .
scientia non olet · About LEMON Manuals