Installation Procedure

Fig 1: View Of Electric Park Lock & Ignition Lock Cylinder Case Assembly

Courtesy of GENERAL MOTORS CORP.

Snap the electric park lock (2) onto the ignition lock cylinder case assembly (1).

Fig 2: Identifying Electric Park Lock & Connector

Courtesy of GENERAL MOTORS CORP.

CAUTION: Refer to SIR INFLATOR MODULE COIL CAUTION .

Reconnect the connector (2) to the electric park lock (1).
Install the upper and lower trim covers. Refer to Steering Column Trim Covers Replacement .
Enable the SIR system. Refer to SIR Disabling and Enabling .