LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Seat Switch Bezel Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Seat Switch Bezel Screws
    GM752955Courtesy of GENERAL MOTORS CORP.
  1. Remove the 3 screws that retain the switch bezel to the seat.
    2. Fig 2: View Of Bulkhead Connector
    GM752953Courtesy of GENERAL MOTORS CORP.
  2. Partially remove the switch bezel from the seat.
  3. Remove the seat switches from the switch bezel by releasing the retaining tabs Refer to Seat Switch Replacement - Power .
  4. Remove the lumbar switch from the switch bezel by releasing the retaining tabs. Refer to Lumbar Switch Replacement - Front .
  5. Remove the switch bezel from the seat.
scientia non olet · About LEMON Manuals