LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Seat Back Recliner Handle Replacement - Front >> Installation Procedure

Installation Procedure

  1. Position the recliner handle onto the seat assembly.
    2. Fig 1: View Of Recliner Handle Screw
    GM755839Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  2. Install the recliner handle.

    Tighten:  Tighten the recliner handle screw to 3 N.m (26 lb in).

scientia non olet · About LEMON Manuals