LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Rear Seat Head Restraint Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Head Restraint Retainer Release Tab
    GM753724Courtesy of GENERAL MOTORS CORP.
  1. Install the retaining clips to the head restraint retractor.
    2. Fig 2: View of Head Restraint Retractor
    GM753741Courtesy of GENERAL MOTORS CORP.
  2. Verify that the retaining clips are fully seated.
  3. Install the rear seat head restraint posts to the head restraint retractor, verifying that the notches in the head restraint posts are indexed toward the back of the seat.
  4. Lower the head restraint to the full down position.
scientia non olet · About LEMON Manuals