LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Head Restraint Guide Replacement - Rear No. 1 >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Head Restraint Guides Retaining Tabs
    GM828219Courtesy of GENERAL MOTORS CORP.
  1. Install the head restraint guides by pushing the guides into the frame until the retaining tabs (1) lock the guide in place.
  2. Install the seat back cover and pad to the seat back. Refer to Seat Back Cover and Pad Replacement - Rear No. 1 .
  3. Install the head restraint. Refer to Rear Seat Head Restraint Replacement .
scientia non olet · About LEMON Manuals