LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Front Seat Head Restraint Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Head Restraint
    GM752736Courtesy of GENERAL MOTORS CORP.
  1. Position the head restraint to the seat assembly.
  2. Verify that the notches in the head restraint posts are indexed toward the rear of the seat assembly.
  3. Push the head restraint downward into the fully installed position.
  4. Raise the head restraint to the full up position. Verify that the head restraint retainer prevents the head restraint from being removed from the seat assembly.
scientia non olet · About LEMON Manuals