LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Front Seat Head Restraint Cover Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Head Restraint Cover
    GM752737Courtesy of GENERAL MOTORS CORP.
  1. Install the cover to the head restraint.
  2. Fig 2: Identifying J-Strips On Bottom Of Head Restraint Cover
    GM752735Courtesy of GENERAL MOTORS CORP.
  3. Install the J-strips on the bottom of the head restraint cover.
  4. Install the front seat head restraint. Refer to Front Seat Head Restraint Replacement .