LEMON Manuals
: Even more car manuals for everyone
Home
>>
Isuzu
>>
2007
>>
Ascender RWD
>>
Repair and Diagnosis (Single Page)
>>
Accessories & Equipment
>>
Seats
>>
Power Seat System
>>
Diagnostic Information and Procedures
>>
DTC B1825, B1850, B1860, B2355, B2365 or B2375
>>
Conditions for Setting the DTC
Conditions for Setting the DTC
The position sensor signal circuit voltage level to the DSM is not within the 0.39-4.58 volt range.