LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting Systems >> Repair Instructions >> Headlamp Replacement (Envoy) >> Removal Procedure

Removal Procedure

  1. Open and support the hood.
    2. Fig 1: Identifying Retaining Tabs, Headlamp Electrical Connector, Side Marker Socket & Park/Turn Socket
    GM742005Courtesy of GENERAL MOTORS CORP.
  2. Pull up on the retaining tabs (1) in order to remove the headlamp assembly from the headlamp panel.
  3. Disconnect the headlamp electrical connector (2) from the headlamp assembly.
  4. Remove the side marker socket (3) from the headlamp assembly.
  5. Remove the park/turn socket (4) from the headlamp assembly.
  6. Remove the headlamp assembly from the headlamp panel.
scientia non olet · About LEMON Manuals