LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting Systems >> Repair Instructions >> Headlamp Housing Panel Replacement (TrailBlazer) >> Removal Procedure

Removal Procedure

  1. Remove the grille. Refer to Grille Replacement (Envoy) , Grille Replacement (Rainier) or Grille Replacement (TrailBlazer) .
  2. Remove the headlamp assemblies. Refer to Headlamp Replacement (Envoy) , Headlamp Replacement (Rainier)  or Headlamp Replacement (TrailBlazer) .
  3. Release the tabs that retain the ambient temperature sensor to the headlamp housing panel.
  4. Note the wiring harness routing for installation.
    5. Fig 1: Identifying Headlamp Panel Assembly Retaining Bolts
    GM752279Courtesy of GENERAL MOTORS CORP.
  5. Remove the bolts that retain the headlamp housing panel to the core support.
  6. Remove the headlamp housing panel from the vehicle.
scientia non olet · About LEMON Manuals